CFS3
CFS3 solvent-borne stain binder (for roller coating)
Solvent-borne stain binder for ROLLER-COATER application (200-400 % on the dye, per Technocolor's binder table). Part of the stain: evens out colour, gives the stain roller-suited rheology (viscosity) and improves adhesion of the next coat. The 2022 catalog lists it for CPS pigment stains. For spraying use CFS1, for wiping CFS4; the water-borne roller equivalent is CFH3.
- Staining flat panels with CPS pigment stains on roller-coater lines (10-20 g/m²)
- Making up stain for UV roller lines
Ask about CFS3
Answers are based on the CFS3 data and the products it mixes with.
Mixing matrix
- CPS1 / CPS2 / CPS3 / CPS8 / CPS010 / CPS011 / CPS030 / CPS033 / CPS036 / CPS037 / CPS040 / CPS044 / CPS045 / CPS046 / CPS22 / CPS23 / CPS24 / CPS25 / CPS51 / CPS52 / CPS53 / CPS54 / CPS56dye_partner% by weight: 200–400 % of dyecatalog
CPS solvent pigment stains applied by roller coater.
Add to the stain concentrate before thinning. Solvent stains only (the water-borne counterpart is the CFH series).
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| dye_partner | CPS1 / CPS2 / CPS3 / CPS8 / CPS010 / CPS011 / CPS030 / CPS033 / CPS036 / CPS037 / CPS040 / CPS044 / CPS045 / CPS046 / CPS22 / CPS23 / CPS24 / CPS25 / CPS51 / CPS52 / CPS53 / CPS54 / CPS56 | 200–400 % of dyecatalog | — | CPS solvent pigment stains applied by roller coater.Add to the stain concentrate before thinning. Solvent stains only (the water-borne counterpart is the CFH series). |
Percentages are per 100 parts of component A.
Characteristics
- Function
- Связующее для красителей на растворителе; способ нанесения — вальцы; 200–400 %. Улучшает равномерность цвета, придаёт реологию под метод нанесения, улучшает адгезию следующего слоя ЛКМ.catalog
- Application method
- roller coatercatalog
- Dose (catalogue)
- on the dyecatalog
- Base
- solvent-bornecatalog
- Compatibility
- Красители CPS; разбавители S10, S12, S90; не для водыrecommended
Application
Roller
- Consumption
- 10–20 g/m² (stain mix)catalog
- Coats
- 1recommended
- Flash-off
- 20 mindealer
- Recoat
- after flash-off, UV/PU sealerrecommended
- Sanding between coats
- don't sand the stain coatrecommended
Flat parts on a roller-coater line only. Roller stain needs binder (catalog); dial in 200-400 % on a test panel.
Process and compatibility
- Substrate preparation
- Sand P150-P220, remove dust.recommended
- Goes over
- bare sanded wood/veneer
- Goes under
- UV or PU sealer
- Don'ts
- Don't thin with water
- Not for spraying — use CFS1
Storage
Safety: Solvent-borne: flammable, vapours harmful. Work in an extracted booth/line with an A-filter respirator and gloves (wiping means skin contact); keep solvent-soaked rags in a closed metal bin. No SDS found — general solvent-coating rules.
Mixed into
CPS / CPS010 / CPS011 / CPS030 / CPS033 / CPS036 / CPS037 / CPS040 / CPS044 / CPS045 / CPS046 / CPS1 / CPS10 / CPS2 / CPS22 / CPS23 / CPS24 / CPS25 / CPS3 / CPS51 / CPS52 / CPS53 / CPS54 / CPS56 / CPS8 / CPS9
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- older official catalog p.12 binder table: CFS3 ВАЛЬЦЫ 200-400 (solvent)
- 2022 catalog CPS block: Связующее CFS1, CFS3, CFS4 0-400 %; thinner S10/S12/S90 500-2000 %
- dealer CPS22: binder roles 'для распыления / для вальцов / для растирания'; full dry 20 min
- dealer search — no product
Not covered by the sources
- no product page, dealer card, TDS or SDS anywhere (dealer search empty, dealer URL 404; web-search budget exhausted)
- solids_pct, viscosity as supplied, density, resin type — unpublished
- shelf life, storage temperature, packaging — unpublished
- pot life of stain+binder mix — unpublished
- absent from 2025/26 catalog (only 'специальное связующее' for wiping is mentioned) — may be discontinued; confirm with Technocolor
- roller viscosity / roller settings
- whether CFC3 in the anegre UV schedule = CFS3