CPS044
CPS044 Solvent-borne pigment stain, bog oak (fumed/ebonised oak look)
Solvent-borne pigment wood stain, ready colour 'bog oak' — a deep dark-brown tone that mimics fumed/bog oak. Evens out colour variation and hides wood defects, levels well, good lightfastness. Supplied ready to spray: use neat or let down with up to 100 % thinner. Intermixes with other CPS colours and solvent-borne stains for custom shades.
- Staining furniture in any wood species
- Bog-oak look on oak, ash and pale species (beech, birch, alder)
- Evening out colour variation in veneer and solid wood under a dark tone
Mix calculator
Ask about CPS044
Answers are based on the CPS044 data and the products it mixes with.
Mixing matrix
- % by weight: 0–100 %dealer% by volume: 0–100 %dealer
S10 — fast, for stains on fine-pore wood; S12 — medium evaporation, for medium-pore wood (dealer lists it as 'NC thinner'); S90 — slow evaporation, for open-pore wood (oak, ash).
Can be sprayed neat (full depth) or let down up to 1:1 — more thinner = lighter, more transparent. Dial it in on a sample board and record by weight.
- % by weight: 500–1000 %catalog
S10 — fast, for stains on fine-pore wood; S12 — medium evaporation, for medium-pore wood (dealer lists it as 'NC thinner'); S90 — slow evaporation, for open-pore wood (oak, ash).
The 2025/26 catalog gives 500-1000 % for the CPS series; the 2022 catalog and the official CPS9/CPS10 concentrate cards give 500-2000 % (by weight and by volume). These are concentrate figures; for ready colour CPS044 the dealer gives 0-100 %.
- % by weight: 0–400 %catalog% by volume: 0–400 %official
CFS1 for spraying; CFS3 for roller coating; CFS4 for wiping (Technocolor catalog binder table, readkong copy). The dealer card for sibling CPS22 gives CFS1 at 20-40 %.
No binder on the CPS044 dealer card — it is optional. Needed for wiping (CFS4) or roller coating (CFS3); for spraying, CFS1 improves evenness and adhesion of the next coat. Test on a sample first.
- CFC3Additive% by weight: 200 %schedule
Official UV schedule for flat anegre-veneered panels: 60-80 g/m², 5 min flash at 20-25 °C. The schedule does not state the application method (60-80 g/m² matches spraying, not the 10-20 g/m² roller rate).
CFC3 appears nowhere else — probably the roller binder (CFS3). Confirm with Technocolor.
- S90Thinner% by weight: 200 %schedule
Official UV schedule for flat anegre-veneered panels: 60-80 g/m², 5 min flash at 20-25 °C. The schedule does not state the application method (60-80 g/m² matches spraying, not the 10-20 g/m² roller rate).
- CPSAdditive% by weight: any ratio %catalog
For a custom shade: mixes with other CPS colours (CPS9 to deepen, CPS22/CPS23 walnuts to lighten/warm up) and solvent-borne stains (CTU).
Record ratios by weight.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Thinner | S10 / S12 / S90 | 0–100 %dealer | 0–100 %dealer | S10 — fast, for stains on fine-pore wood; S12 — medium evaporation, for medium-pore wood (dealer lists it as 'NC thinner'); S90 — slow evaporation, for open-pore wood (oak, ash).Can be sprayed neat (full depth) or let down up to 1:1 — more thinner = lighter, more transparent. Dial it in on a sample board and record by weight. |
| Thinner | S10 / S12 / S90 | 500–1000 %catalog | — | S10 — fast, for stains on fine-pore wood; S12 — medium evaporation, for medium-pore wood (dealer lists it as 'NC thinner'); S90 — slow evaporation, for open-pore wood (oak, ash).The 2025/26 catalog gives 500-1000 % for the CPS series; the 2022 catalog and the official CPS9/CPS10 concentrate cards give 500-2000 % (by weight and by volume). These are concentrate figures; for ready colour CPS044 the dealer gives 0-100 %. |
| Additive | CFS1 / CFS3 / CFS4 | 0–400 %catalog | 0–400 %official | CFS1 for spraying; CFS3 for roller coating; CFS4 for wiping (Technocolor catalog binder table, readkong copy). The dealer card for sibling CPS22 gives CFS1 at 20-40 %.No binder on the CPS044 dealer card — it is optional. Needed for wiping (CFS4) or roller coating (CFS3); for spraying, CFS1 improves evenness and adhesion of the next coat. Test on a sample first. |
| Additive | CFC3 | 200 %schedule | — | Official UV schedule for flat anegre-veneered panels: 60-80 g/m², 5 min flash at 20-25 °C. The schedule does not state the application method (60-80 g/m² matches spraying, not the 10-20 g/m² roller rate).CFC3 appears nowhere else — probably the roller binder (CFS3). Confirm with Technocolor. |
| Thinner | S90 | 200 %schedule | — | Official UV schedule for flat anegre-veneered panels: 60-80 g/m², 5 min flash at 20-25 °C. The schedule does not state the application method (60-80 g/m² matches spraying, not the 10-20 g/m² roller rate). |
| Additive | CPS | any ratio %catalog | — | For a custom shade: mixes with other CPS colours (CPS9 to deepen, CPS22/CPS23 walnuts to lighten/warm up) and solvent-borne stains (CTU).Record ratios by weight. |
Percentages are per 100 parts of component A.
Characteristics
- Components
- 1K stain + thinner (+ optional CFS1 binder)recommended
- Carrier
- solvent-borne (органоразбавимый, «ОР»)dealer
- Lightfastness
- good (светостойкость)dealer
- Hiding
- high (высокая укрывистость) — series propertycatalog
- Levelling
- good (хорошая выравнивающая способность)dealer
- Pot life
- n/a (no hardener)recommended
- Gloss
- nonerecommended
- Drying · Conditions
- 20 °C
- Drying · Full dry (min)
- 20 mindealer
- Drying · Line flash-off (min)
- 5 minschedule
Colours
- CPS044 · bog oak (dark, smoked-oak brown)
Application
HVLP
- Nozzle
- 1.2–1.4 (typ. 1.3) mmrecommended
- Pressure · air
- 1.5–2 barrecommended
- Spray viscosity
- 11–14 s DIN4recommended
- Consumption
- 80–100 g/m²dealer
- Flash-off
- 20 mindealer
Stir thoroughly — the pigment settles. Keep shaking/stirring the cup while you work. Lay one even wet coat, no puddles; go lighter on end grain (it drinks more and goes much darker — very visible with a dark tone). Always make a sample on the same species: bog oak lands with more contrast on pale woods.
Cloth or pad
The CPS044 dealer card lists spraying only; spray-and-wipe comes from the CPS series catalog data and needs a binder. Wiping with a sponge or soft rag removes the excess after spraying.
Roller coater (UV)
Flat parts on a roller-coater line only; the series uses binder CFS3 for rollers. The official UV (anegre) schedule uses 60-80 g/m² without naming the method — more like spraying; there the stain flashes 5 min at 20-25 °C before VTS20011 UV filler.
Airmix (air-assisted airless)
- Nozzle
- 09/40-11/40 tip (0.23-0.28 mm)recommended
- Pressure · fluid
- 8–15 barrecommended
- Pressure · air
- 1–2 barofficial
For production lines; HVLP is plenty in a workshop.
Process and compatibility
- Substrate preparation
- Sand P150 → P180 → P220 (belt), de-dust.schedule
- Sanding
- Never sand the stain itself. Sand only the first primer coat (P280-P320); if you cut through to the stain, touch it up.recommended
- Temperature and humidity
- 15-25 °C, RH ≤ 75 %recommended
Storage
- Packaging
- 1dealer
Used in finishing systems
Mixed into
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- dealer CPS044: properties, use, spray 80-100 g/m², S10/S12/S90 0-100 % by weight & volume, full dry 20 min, CPS→PTS20→PTL20 SM instruction, 1/5 л, 1 234 ₽/л
- 2022 catalog: CPS thinner 500-2000 %, binder CFS1/CFS3/CFS4 0-400 %, CPS colour list incl. CPS044 мореный дуб
- official sibling CPS9 card (series chemistry)
- UV anegre schedule CPS 100/CFC3 200/S90 200
- application methods
- catalog binder table: CFS1 spray, CFS3 roller, CFS4 wiping
- dealer sibling CPS22: S10/S12/S31/S90 200-1000 %, CFS1 20-40 % (used for comparison only)
Not covered by the sources
- no official t-color.ru page for CPS044 (evidence NO_OFFICIAL)
- solids %
- viscosity as supplied
- density
- drying times other than 'full dry 20 min'
- shelf life
- storage temperature
- SDS/hazard data
- no Technocolor TDS PDF found (web search budget exhausted this run)
- nozzle/pressure/spray viscosity not published — derived
- binder (CFS1/CFS3/CFS4) not listed on CPS044 card — wiping/roller use only by series data
- CPS044 named in the 2022 catalog colour list (мореный дуб) but not in the 2025/26 catalog or any official schedule (series-level only)
- conflict: dealer thinner 0-100 % vs series 500-1000 % (2025 catalog) / 500-2000 % (2022 catalog, official CPS9/CPS10) — series figures fit the concentrates
- colour reference (RAL/sample) not published