CPS037
CPS037 solvent-borne pigment stain, Red Wood («Красное дерево»)
Ready-to-spray solvent-borne pigment stain in 'Red Wood' (красное дерево). Evens out colour variation and masks wood defects, levels the colour well, good lightfastness. Supplied practically at working strength — thin 0-100 % with S10/S12/S90. Spray 80-100 g/m², dry 20 min, then sealer and topcoat. Can be intermixed with the rest of the CPS range to hit a custom shade.
- Staining furniture in any wood species
- Red-wood toning of pale species (beech, birch, alder, anegre) — example, not from a source
- Evening out colour variation on solid wood and veneer
- Under the PU system PTS20 → PTL20 SM (dealer instruction)
Mix calculator
Ask about CPS037
Answers are based on the CPS037 data and the products it mixes with.
Mixing matrix
- % by weight: 0–100 (typ. [object Object]) %dealer% by volume: 0–100 %dealer
S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.
CPS037 comes practically ready to use: 0-100 % thinner (dealer gives the same figure by weight and by volume). Dose thinner for colour strength, not viscosity.
- % by weight: 500–1000 %catalog
S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.
2025/26 catalog figure for the whole CPS series — meant for the concentrates. Not for CPS037, which is already at working strength; the dealer's 0-100 % takes priority.
- % by weight: 0–400 %catalog
CFS1 for spraying (0-200 %), CFS3 for roller coating (200-400 %), CFS4 for wiping (200-400 %) per the older Technocolor catalog; the 2022 catalog gives one 0-400 % range. The dealer (CPS9 page) calls CFS1 'solvent binder for spraying', 0-400 %.
Binders are given in the catalog for the series as a whole; the CPS037 dealer page doesn't list them. Adding binder also weakens the colour.
- CFC3Additive% by weight: 200 %schedule
Roller-coating flat (anegre veneer) panels under a UV system, 60-80 g/m².
CFC3 appears only in this UV schedule: no t-color.ru page, dealer search empty. From the recipe it is a stain binder for UV lines (possibly related to the roller binder CFS3); confirm with Technocolor. Schedule ratio is for the generic 'CPS' series; with ready-to-use CPS037 the same ratio will give a very pale tone.
- S90Thinner% by weight: 200 %schedule
UV schedule, roller application.
Schedule ratio is for the generic 'CPS' series; with ready-to-use CPS037 the same ratio will give a very pale tone.
- CPSAdditive% by weight: any ratio %catalog
For a custom shade: 'materials within a series can be mixed'; also mix well with other solvent-borne stains (CTU).
Record ratios by weight.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Thinner | S10 / S12 / S90 | 0–100 (typ. [object Object]) %dealer | 0–100 %dealer | S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.CPS037 comes practically ready to use: 0-100 % thinner (dealer gives the same figure by weight and by volume). Dose thinner for colour strength, not viscosity. |
| Thinner | S10 / S12 / S90 | 500–1000 %catalog | — | S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.2025/26 catalog figure for the whole CPS series — meant for the concentrates. Not for CPS037, which is already at working strength; the dealer's 0-100 % takes priority. |
| Additive | CFS1 / CFS3 / CFS4 | 0–400 %catalog | — | CFS1 for spraying (0-200 %), CFS3 for roller coating (200-400 %), CFS4 for wiping (200-400 %) per the older Technocolor catalog; the 2022 catalog gives one 0-400 % range. The dealer (CPS9 page) calls CFS1 'solvent binder for spraying', 0-400 %.Binders are given in the catalog for the series as a whole; the CPS037 dealer page doesn't list them. Adding binder also weakens the colour. |
| Additive | CFC3 | 200 %schedule | — | Roller-coating flat (anegre veneer) panels under a UV system, 60-80 g/m².CFC3 appears only in this UV schedule: no t-color.ru page, dealer search empty. From the recipe it is a stain binder for UV lines (possibly related to the roller binder CFS3); confirm with Technocolor. Schedule ratio is for the generic 'CPS' series; with ready-to-use CPS037 the same ratio will give a very pale tone. |
| Thinner | S90 | 200 %schedule | — | UV schedule, roller application.Schedule ratio is for the generic 'CPS' series; with ready-to-use CPS037 the same ratio will give a very pale tone. |
| Additive | CPS | any ratio %catalog | — | For a custom shade: 'materials within a series can be mixed'; also mix well with other solvent-borne stains (CTU).Record ratios by weight. |
Percentages are per 100 parts of component A.
Characteristics
- Components
- 1K stain + thinnerrecommended
- Carrier
- solvent-borne (ОР = органоразбавимый)dealer
- Lightfastness
- good (светостойкость)dealer
- Hiding
- evens out colour variation, hides defectsdealer
- Levelling
- good (хорошая выравнивающая способность)dealer
- Pot life
- n/a (no hardener)recommended
- Gloss
- nonerecommended
- Drying · Conditions
- 20 °C
- Drying · Full dry (min)
- 20 mindealer
- Drying · Line flash-off (min)
- 5 minschedule
Colours
- CPS037 · red wood (krasnoe derevo; distinct from CPS036 mahogany)
Application
HVLP
- Nozzle
- 1.2–1.4 (typ. 1.3) mmrecommended
- Pressure · air
- 1.5–2 barrecommended
- Spray viscosity
- 10–13 s DIN4recommended
- Consumption
- 80–100 g/m²dealer
- Flash-off
- 20 mindealer
Stir thoroughly — the pigment settles. Keep shaking/stirring the cup while you work. Lay one even wet coat, no puddles; go lighter on end grain (it drinks more and goes darker). To wipe: spray, give it 1-3 min, then wipe along the grain with a sponge or lint-free rag, packing pigment into the pores (pore-highlight effect on open-grain wood — needs the wiping binder CFS4, 200-400 % per the older catalog).
Cloth or pad
- Applicability
- optional, series-levelrecommended
The CPS037 dealer page lists spraying only. Wiping with a sponge/rag right after spraying is fine (as for the whole series) — it lifts the excess and evens the tone across patchy veneer.
Roller coater (UV)
Series-level only (official CPS9 page and the UV anegre schedule). Not listed for CPS037; on a roller line, set the mix from a test panel.
Airmix (air-assisted airless)
- Nozzle
- 09/40-11/40 tip (0.23-0.28 mm)recommended
- Pressure · fluid
- 8–15 barrecommended
- Pressure · air
- 1–2 barofficial
For production lines; HVLP is plenty in a workshop.
Process and compatibility
Storage
- Packaging
- 1 л / 5 лdealer
- Shelf life
- 12 months in sealed original can (verify on label)recommended
- Storage temperature
- +5…+30 °C, away from heat/flamerecommended
Used in finishing systems
Mixed into
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- dealer CPS037: properties, spray 80-100 g/m², thinner S10/S12/S90 0-100 % by weight and volume, full dry 20 min, instruction CPS → 20 min → PTS20 150 g/m² → 2 h → P280-320 → PTL20 SM 150 g/m² → 8 h, 1/5 л, 1876 ₽/л
- official CPS9 page: properties, methods, thinner/binder %
- official CPS10 page
- 2022 catalog: CFS1/CFS3/CFS4 binders 0-400 %, CPS colour list
- UV anegre panel schedule CPS 100/CFC3 200/S90 200
- dealer: full dry 20 min, mix table
- application methods
- older Technocolor catalog: CFS1 spray 0-200 %, CFS3 roller 200-400 %, CFS4 wiping 200-400 %
- 2022 catalog colour list: CPS036 махагон, CPS037 красное дерево
Not covered by the sources
- no official t-color.ru page for CPS037
- solids %
- viscosity as supplied
- density
- drying beyond 'full dry 20 min'
- pot-life n/a (1K) — derived
- shelf life / storage temperature (derived only)
- SDS / hazard data
- no Technocolor TDS PDF found (dealer 'Документация' tab empty; none found in family research)
- whether CFS1/CFS3/CFS4 binders are approved for CPS037 (series-level only)
- cloth/roller application for CPS037 not confirmed (dealer lists spraying only)
- CFC3 binder in UV schedule: no product page or TDS
- catalog 500-1000 % thinner (series) conflicts with dealer 0-100 % for CPS037