CPS045
CPS045 solvent-borne pigment stain, Dark Cherry
Ready-to-use solvent-borne pigment stain in Dark Cherry. Evens out colour variation and masks wood defects, levels the colour well, good lightfastness. Comes near working strength: thin with S10/S12/S90 from 0 to 100 %. Spray at 80-100 g/m²; per the series data it can also be sprayed-and-wiped or roller-coated. Intermixes with the rest of the CPS range and other solvent-borne stains for a custom shade.
- Staining furniture in any wood species
- Dark-cherry tone on veneer and solid wood
- Cherry imitation on pale species (birch, beech, alder, maple)
- Evening out colour variation
Mix calculator
Ask about CPS045
Answers are based on the CPS045 data and the products it mixes with.
Mixing matrix
- % by weight: 0–100 (typ. [object Object]) %dealer% by volume: 0–100 %dealer
S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.
CPS045 comes ready to use: 0-100 % thinner (S10 general thinner, S12 nitro thinner, S90 slow stain thinner).
- % by weight: 500–1000 %catalog
S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.
2025/26 catalog figure for the whole CPS series (aimed at the concentrates); the 2022 catalog and the official CPS9/CPS10 pages give 500-2000 %. For ready colour CPS045 the dealer's 0-100 % takes priority.
- % by weight: 0–400 %catalog
CFS1 for spraying, CFS3 for roller coating, CFS4 for wiping (2022 catalog: 'CFS1, CFS3, CFS4 0-400 %'; the official CPS9 page lists only CFS1 0-400 %).
The dealer lists no binder for ready colour CPS045; 20-40 % CFS1 is a sensible start — that is what the dealer gives for CPS22 (one row labelled 'solvent binder for spraying / for rollers / for wiping').
- CFC3Additive% by weight: 200 %schedule
Roller-coating flat (anegre veneer) panels under a UV system, 60-80 g/m².
CFC3 has no product page and isn't sold by the dealer; from the recipe it is a stain binder (possibly a typo for CFS3, the roller binder — a guess). Confirm with Technocolor.
- S90Thinner% by weight: 200 %schedule
UV schedule, roller application.
- CPSAdditive% by weight: any ratio %catalog
For a custom shade: 'materials within a series can be mixed'; also mix well with other solvent-borne stains (CTU).
Record ratios by weight.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Thinner | S10 / S12 / S90 | 0–100 (typ. [object Object]) %dealer | 0–100 %dealer | S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.CPS045 comes ready to use: 0-100 % thinner (S10 general thinner, S12 nitro thinner, S90 slow stain thinner). |
| Thinner | S10 / S12 / S90 | 500–1000 %catalog | — | S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.2025/26 catalog figure for the whole CPS series (aimed at the concentrates); the 2022 catalog and the official CPS9/CPS10 pages give 500-2000 %. For ready colour CPS045 the dealer's 0-100 % takes priority. |
| Additive | CFS1 / CFS3 / CFS4 | 0–400 %catalog | — | CFS1 for spraying, CFS3 for roller coating, CFS4 for wiping (2022 catalog: 'CFS1, CFS3, CFS4 0-400 %'; the official CPS9 page lists only CFS1 0-400 %).The dealer lists no binder for ready colour CPS045; 20-40 % CFS1 is a sensible start — that is what the dealer gives for CPS22 (one row labelled 'solvent binder for spraying / for rollers / for wiping'). |
| Additive | CFC3 | 200 %schedule | — | Roller-coating flat (anegre veneer) panels under a UV system, 60-80 g/m².CFC3 has no product page and isn't sold by the dealer; from the recipe it is a stain binder (possibly a typo for CFS3, the roller binder — a guess). Confirm with Technocolor. |
| Thinner | S90 | 200 %schedule | — | UV schedule, roller application. |
| Additive | CPS | any ratio %catalog | — | For a custom shade: 'materials within a series can be mixed'; also mix well with other solvent-borne stains (CTU).Record ratios by weight. |
Percentages are per 100 parts of component A.
Characteristics
- Components
- 1K stain + thinner (+ optional CFS1 binder)recommended
- Carrier
- solvent-borne (ОР = органоразбавимый)dealer
- Lightfastness
- good (светостойкость)dealer
- Hiding
- evens out colour variation, hides defectsdealer
- Levelling
- good (хорошая выравнивающая способность)dealer
- Pot life
- n/a (no hardener)recommended
- Gloss
- nonerecommended
- Drying · Conditions
- 20 °C
- Drying · Full dry (min)
- 20 mindealer
- Drying · Line flash-off (min)
- 5 minschedule
Colours
- CPS045 · dark cherry
Application
HVLP
- Nozzle
- 1.2–1.4 (typ. 1.3) mmrecommended
- Pressure · air
- 1.5–2 barrecommended
- Spray viscosity
- 10–14 s DIN4recommended
- Consumption
- 80–100 g/m²dealer
- Flash-off
- 20 mindealer
Stir thoroughly — the pigment settles. Keep shaking/stirring the cup while you work. Lay one even wet coat, no puddles; go lighter on end grain (it drinks more and goes darker). To wipe: spray, give it 1-3 min, then wipe along the grain with a sponge or lint-free rag, packing pigment into the pores (pore-highlight effect on open-grain wood — needs CFS1 binder).
Cloth or pad
Wiping with a sponge or soft rag removes the excess after spraying (Technocolor's method definition). For a pore-highlight effect on oak/ash use CFS1 binder.
Roller coater (UV)
Flat parts on a roller-coater line only. In the official UV schedule the stain flashes 5 min at 20-25 °C before VTS20011 UV filler.
Airmix (air-assisted airless)
- Nozzle
- 09/40-11/40 tip (0.23-0.28 mm)recommended
- Pressure · fluid
- 8–15 barrecommended
- Pressure · air
- 1–2 barofficial
For production lines; HVLP is plenty in a workshop.
Process and compatibility
- Substrate preparation
- Sand P150 → P180 → P220 (belt), de-dust.schedule
- Sanding
- Never sand the stain itself. Sand only the first primer coat (P280-P320); if you cut through to the stain, touch it up.recommended
- Temperature and humidity
- 15-25 °C, RH ≤ 75 %recommended
Storage
- Packaging
- 1 л / 5 лdealer
- Shelf life
- 12 months in sealed original can (verify on label)recommended
- Storage temperature
- +5…+30 °C, away from heat and flamerecommended
Used in finishing systems
Mixed into
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- dealer CPS045: properties, spray 80-100 g/m², thinner S10/S12/S90 0-100 % by weight & volume, full dry 20 min, instruction PTS20 → PTL20 SM, 1/5 л, 956 ₽/л
- official CPS9 page: properties, methods, thinner/binder %
- official CPS10 page
- 2022 catalog: CPS thinner 500-2000 %, CFS1/CFS3/CFS4 binders 0-400 %, CPS045 'вишня темная' in colour list
- UV anegre panel schedule CPS 100/CFC3 200/S90 200
- dealer: thinner 0-100 %, finishing instruction PTS20/PTL20 SM
- application methods
- dealer CPS22: CFS1 binder 20-40 % (reference dose only)
Not covered by the sources
- no official t-color.ru page for CPS045
- solids %
- viscosity as supplied
- density
- drying beyond 'full dry 20 min'
- pot life n/a (1K) — no published working-time data
- binder (CFS1) dosage for CPS045 not published
- shelf life / storage temperature (derived only)
- SDS / hazard data
- no Technocolor TDS PDF found (web-search budget exhausted this run; none found in earlier family research)
- CFC3 binder in UV schedule unexplained
- conflict: dealer 0-100 % thinner vs series catalog 500-1000 % (catalog figure aimed at concentrates)