Skip to content
Dugan Design
← All products
+ Add with a base product
ThinnersThinner

LZC1000

LZC1000 Acetone-based fast thinner (Milesi 'Diluente acetonico')

Milesi fast acetone-based thinner. Per the LZC series sheet: machine/gun washing, spray-applied stains and polyesters. In the Kromolux (CLT) dye TDS it is the main solvent for reducing the concentrate (1 part CLT : 0.5 LZC97 : 9.5 LZC1000). t-color.ru lists S10/S12/S90 for CLT instead.

  • Washing spray equipment and guns
  • Reducing spray stains (Kromolux CLT: 1 : 0.5 LZC97 : 9.5 LZC1000)
  • Polyester products (per the Milesi sheet)

Ask about LZC1000

Answers are based on the LZC1000 data and the products it mixes with.

Questions and answers are stored to improve the assistant and prevent abuse; the question text is processed by Anthropic (USA). Privacy policy

Mixing matrix

  • LZC1000 / LZC97Thinner
    % by weight: 500–800 (typ. 1000) %datasheet

    Solvent reduction of Kromolux (CLT) dye concentrate for spraying.

    Milesi example: 1 part CLT + 0.5 LZC97 + 9.5 LZC1000. The slow LZC97 is there to stop the very fast LZC1000 drying into lap marks.

  • LZC1000cleaner
    % by weight: null %datasheet

    Flushing guns, pumps and hoses after PU/PE/NC materials.

    Use neat; don't leave catalysed 2K mix in the equipment before flushing.

Percentages are per 100 parts of component A.

Characteristics

Density
0.790 ± 0.01 g/cm³ (specific gravity)datasheet
Evaporation rate
fast (definizione = rapido)datasheet
Base solvent
acetone-based (diluente acetonico)datasheet
VOC compliance
formulated to comply with DPR 203/88 (Italian air-emission decree)datasheet
Solids
0recommended
Drying · Stain with LZC1000
CLT stain reduced with LZC1000: dry 30 s at 20 °C, 10 min IR+warm air 60 °C, overcoatable with sealer after 1 mindatasheet
Not applicable
viscosity, gloss, hardness, lightfastness, chemical_resistance, elasticity, thixotropic, pot_life

Application

HVLP

Nozzle
1–1.3 mmrecommended
Pressure · air
0.5–0.7 bar at air caprecommended
Pressure · fluid
0.3–0.8 bar (pot) / gravity cuprecommended
Spray viscosity
water-thin, below DIN4 range (~10–11 s)recommended
Consumption
80–100 g/m² (of reduced stain)official
Coats
1–2 coatsrecommended
Flash-off
1 mindatasheet
Recoat
sealer after 1 min (CLT + LZC1000)datasheet
Sanding between coats
no — don't sand dye coats; sand the sealerrecommended

Not applied on its own; settings below are for CLT stain reduced with LZC1000 (see CLT records).

Carousel

Consumption
5–20 g/m² (concentrate)datasheet
Nozzle
per line set-uprecommended
Pressure
per line set-uprecommended

Automatic rotating gun (carousel): 700–1500 % dilution.

Process and compatibility

Temperature and humidity
sheet data at 20 °C / 70 % RHdatasheet
How to add
Pre-blend LZC97 with LZC1000, then add the CLT concentrate while stirring.; Mix only a shift's worth — it evaporates fast and the shade concentrates.recommended

Storage

Packaging
not published by Technocolor or any dealer foundrecommended
Shelf life
not published; stable in the sealed original canrecommended
Storage temperature
indoors 5–30 °C, ventilated, out of sunlight and away from ignition sources; keep tightly closedrecommended

Mixed into

CLT1 / CLT10 / CLT12 / CLT14 / CLT16 / CLT22 / CLT23 / CLT24 / CLT3 / CLT4 / CLT41 / CLT43 / CLT44 / CLT45 / CLT47 / CLT49 / CLT5 / CLT50 / CLT51 / CLT52 / CLT53 / CLT54 / CLT55 / CLT56 / CLT57 / CLT58 / CLT59 / CLT6 / CLT60 / CLT61 / CLT62 / CLT63 / CLT64 / CLT7 / CLT8 / CLT9 / LZC1000

Sources

Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).

Not covered by the sources
  • No t-color.ru page and no t-colormarket.ru listing; not part of the Technocolor range as far as found
  • Only data: 1998 Milesi LZC collective sheet + 2006 CLT Kromolux TDS
  • Composition beyond 'acetonic', flash point, VOC, pack sizes, SDS not published
  • Web search budget exhausted in this session; non-RU dealer listings not re-searched