Skip to content
Dugan Design
← All products
+ Add with a base product
ThinnersThinner

LZC1024

LZC1024 Nitro (NC) thinner (Milesi 'Diluente nitro')

Milesi medium-fast nitro thinner for nitrocellulose products. Listed in the Kromolux (CLT) dye TDS among allowed thinners (LZC1000 – LZC1024 – LZC97 – LTC5 – water). For Milesi NC sealers/lacquers LAC/LAT/LEC/LET/LCC the anti-blush LZC1025 is named instead.

  • Reducing nitrocellulose (NC) products
  • Alternative solvent for Kromolux CLT dyes

Ask about LZC1024

Answers are based on the LZC1024 data and the products it mixes with.

Questions and answers are stored to improve the assistant and prevent abuse; the question text is processed by Anthropic (USA). Privacy policy

Mixing matrix

  • LZC1024Thinner
    % by weight: 500–800 %datasheet

    Reducing Kromolux (CLT) dye instead of LZC1000 when a slightly slower solvent is wanted.

    For NC lacquers follow that product's TDS; Milesi names LZC1025 for its NC ranges.

Percentages are per 100 parts of component A.

Characteristics

Density
0.836 ± 0.01 g/cm³ (specific gravity)datasheet
Evaporation rate
medium-fast (definizione = medio rapido)datasheet
Solids
0recommended
Not applicable
viscosity, gloss, hardness, lightfastness, chemical_resistance, elasticity, thixotropic, pot_life

Application

HVLP

Nozzle
1–1.3 mmrecommended
Pressure · air
0.5–0.7 bar at air caprecommended
Pressure · fluid
0.3–0.8 bar (pot) / gravity cuprecommended
Spray viscosity
water-thin, below DIN4 rangerecommended
Consumption
5–20 g/m² (concentrate)datasheet
Coats
1–2 coatsrecommended
Flash-off
2–5 minrecommended
Sanding between coats
norecommended

Not applied on its own; settings are for CLT stain reduced with solvent.

Process and compatibility

Temperature and humidity
sheet data at 20 °C / 70 % RHdatasheet

Storage

Packaging
not published by Technocolor or any dealer foundrecommended
Shelf life
not published; stable in the sealed original canrecommended
Storage temperature
indoors 5–30 °C, ventilated, out of sunlight and away from ignition sources; keep tightly closedrecommended

Mixed into

CLT1 / CLT10 / CLT14 / CLT16 / CLT22 / CLT23 / CLT24 / CLT3 / CLT4 / CLT41 / CLT43 / CLT44 / CLT45 / CLT47 / CLT50 / CLT51 / CLT52 / CLT53 / CLT54 / CLT55 / CLT56 / CLT57 / CLT58 / CLT59 / CLT60 / CLT61 / CLT62 / CLT63 / CLT64 / LZC1024

Sources

Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).

Not covered by the sources
  • No t-color.ru page and no t-colormarket.ru listing
  • Only data: 1998 Milesi LZC sheet + CLT TDS thinner list
  • Composition, flash point, VOC, pack sizes, SDS not published
  • No product-specific dilution %; CLT TDS % covers all listed thinners
  • Web search budget exhausted in this session; non-RU dealer listings not re-searched