CPH26/1
CPH26/1 water-based pigmented wood stain, wenge
Dealer SKU with the same text as CPH26 (same properties, coverage, 15–20 % CFH1, same HTL20 SM system). Sold in 1/5/25 kg at roughly half the price (344 vs 773 RUB/kg) — likely a different strength/version; the manufacturer doesn't explain the difference. No official page.
Mix calculator
Ratio 100 :
| Component | Weigh out |
|---|---|
| CPH26/1part A | 500 g |
| Total | 500 g |
Covers roughly 5.56 m² at 90 g/m².
Ask about CPH26/1
Answers are based on the CPH26/1 data and the products it mixes with.
Mixing matrix
- CFH1Additive% by weight: 15–20 % pre-addeddealer
- % by weight: any ratio %dealer
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Additive | CFH1 | 15–20 % pre-addeddealer | — | |
| Additive | CPH1 / CPH3 / CPH9 / CPH10 / CPH21 / CPH22 / CPH23 / CPH24 / CPH25 / CPH26 | any ratio %dealer | — |
Percentages are per 100 parts of component A.
Characteristics
- Drying · Conditions
- 20 °C
- Drying · Before overcoating (h)
- 4 hdealer
Colours
- CPH26/1 · wenge
Application
HVLP
- Consumption
- 80–100 g/m2dealer
- Nozzle
- 1.2–1.4 mmrecommended
- Pressure · air
- 1.5–2 barrecommended
Gun setup as for CPH26: 1.2–1.4 mm tip, 1.5–2.0 bar HVLP inlet. Stainless fluid path; stir — pigment settles.
Process and compatibility
- Substrate preparation · Sanding
- P150, P180dealer
- Goes under
- HTL20 SM
Storage
- Packaging
- 1 kg, 5 kg, 25 kgdealer
Mixed into
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
Not covered by the sources
- water let-down ratio not given for /1 (assume as CPH26 only after a test panel)
- relationship to CPH26 (concentration?) undocumented
- solids, density, viscosity
- official page absent
- full-dry time not listed on /1 page (only 4 h before primer in the instruction)