Skip to content
Dugan Design
← All products
+ Add with a base product
ThinnersThinner

S60

S60 Oil thinner / clean-up solvent

Thinner / clean-up solvent for Technocolor OTL alkyd-oil finishes. Per the dealer it has two jobs: (1) thinning the oil when needed — 5 % max; (2) cleaning brushes and rollers after oiling.

  • OTL10 priming oil — thin 5 % max, clean brush and roller
  • OTL20 interior oil — thin 5 % max, clean brush and roller
  • OTL60.10–OTL60.20 tinted terrace oil — brush clean-up
  • OTL90.10 white hardwax oil — brush clean-up

Ask about S60

Answers are based on the S60 data and the products it mixes with.

Questions and answers are stored to improve the assistant and prevent abuse; the question text is processed by Anthropic (USA). Privacy policy

Mixing matrix

  • S60Thinner

    Only if needed: oil thick from the cold, dense timber. Normally applied as supplied.

    Oil is tinted with CL pastes (max 5 %) — don't overload the oil with additions in total.

  • S60Thinner

    Only if needed.

    Also tints with CL pastes (max 5 %).

  • S60Thinner

    By analogy with OTL10/OTL20; better applied neat.

    Not confirmed by the manufacturer.

Percentages are per 100 parts of component A.

Characteristics

Solvent type
алифатический углеводородный растворитель типа уайт-спирита / нефраса (предположительно) / aliphatic hydrocarbon, white-spirit / mineral-spirits type (presumed)recommended
Evaporation rate
medium–slow (expected, white-spirit-like)recommended
Effect on cure
does not speed drying; above 5 % it cuts solids and protectionrecommended
Compatibility
OTL oils only (thinning ≤ 5 %: OTL10, OTL20; tool clean-up: OTL10, OTL20, OTL60.10–OTL60.20, OTL90.10)dealer

Application

Brush

After oiling with OTL, rinse brushes and rollers in S60, squeeze out, repeat in a clean batch, then wash with soapy water. Rags and spent solvent go into a closed metal can.

Roller

Roller clean-up as for brushes (OTL10, OTL20).

Conventional spray

Applicable
no
Nozzle
n/arecommended
Why ru
Объём промывки — стандартная практика для краскопультов с верхним бачком.

S60 is not sprayed on its own. To flush a gun after oil, run 100–200 ml of S60 through it.

Process and compatibility

Goes with
OTL10, OTL20, OTL60, OTL90
Temperature and humidity
OTL oils 10–35 °Cdealer
Don'ts
  • don't thin oil beyond 5 % S60 — protection and solids drop
  • don't use S60 in place of S30/S50/S70/S80 in PU, acrylic or polyester materials
  • don't thin OTL oils with PU thinners (S50/S80) — they are not specified for OTL
  • don't leave rags soaked in oil and solvent balled up — spontaneous combustion risk

Storage

Storage temperature
tightly closed, cool, away from ignitionrecommended

Safety: Expect a flammable liquid. Use with ventilation and gloves, away from ignition. Lay oily rags flat to dry outdoors or soak in water in a closed metal can.

Mixed into

OTL10 / OTL20 / OTL40 / OTL60 / OTL90 / OTL90.10 / S60

Sources

Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).

Not covered by the sources
  • No official t-color.ru page and no t-colormarket.ru product page (search returns nothing; /razbaviteli_1/s60/ is 404)
  • Not in the 2025–2026 catalog thinner table
  • Chemical composition / solvent type (white-spirit type is only presumed)
  • Evaporation rate, density, flash point
  • Weight vs volume basis of the '≤ 5 %' limit
  • Whether S60 is approved for OTL40 (dealer OTL40 page and official OTL40 page do not mention any thinner) and as a thinner (not only cleaner) for OTL60/OTL90 — those pages name it for brush cleaning only
  • Packaging sizes, price, shelf life, storage temperature
  • SDS / TDS — none found (re-checked 2026-10-05: t-colormarket, lakokraska31, woodonline, ndom31 searches return no S60)
  • Not used in any official finishing schedule (information/technology)