OTL90
OTL90 hardwax oil for parquet and worktops, clear
Hardwax oil for parquet, engineered boards and worktops. Soaks into the wood, brings out the natural grain and leaves a hard-wearing, breathable finish. Makes floors easier to look after and extends their service life. Moisture- and weather-resistant, easy to apply, tintable, no toxic additives.
- Parquet, solid and engineered floorboards
- Worktops / tabletops
- Upkeep: one rag coat on the highest-wear spots from time to time; once a year if needed, one coat of the tinted oil
Single-component product: no mixing needed — use as supplied (see application below).
Ask about OTL90
Answers are based on the OTL90 data and the products it mixes with.
Mixing matrix
- Thinner% by weight: 0 %recommended
Always — use as supplied
Stir thoroughly before use (especially OTL90.10, the pigment settles).
- S60Additive
Brush cleaning only
Dealer: brush can be cleaned with S60 solvent. Not listed as a thinner for OTL90.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Thinner | 0 %recommended | — | Always — use as suppliedStir thoroughly before use (especially OTL90.10, the pigment settles). | |
| Additive | S60 | — | — | Brush cleaning onlyDealer: brush can be cleaned with S60 solvent. Not listed as a thinner for OTL90. |
Percentages are per 100 parts of component A.
Characteristics
- Solids
- 46 ± 1 %official
- Viscosity
- 16 ± 2 sofficial
- Density
- 0.91 ± 0.01 g/cm³ (удельный вес)official
- Gloss
- нетdealer
- Pot life
- n.a.recommended
- Drying · Full cure
- не менее 12 ч h, 24 h
- Drying · Recoat (h)
- 12 hdealer
- Drying · Wipe off excess (min)
- 10–15 mindealer
- Drying · Conditions
- 20 °C
- Thixotropy
- norecommended
- Moisture resistance
- влагостойкое, атмосферостойкоеdealer
Colours
- OTL90 · clear
- OTL90.10 · white
Application
Brush
- Consumption
- 60–80 g/m² per coatdealer
- Coats
- 2dealer
- Recoat
- 12 hdealer
- Wipe off excess
- 10–15 mindealer
Apply with a stiff natural-bristle brush, working it into the wood. Wipe off the excess with a rag after 10–15 min. 12 h between coats, 24 h to full dry.
Roller
- Consumption
- 60–80 g/m² per coatdealer
- Coats
- 2dealer
- Recoat
- 12 hdealer
Roll on evenly, working it into the wood; wipe off the excess with a rag after 10–15 min.
Cloth or pad
- Consumption
- 60–80 g/m² per coatdealer
Rag-on ('растирание') is a listed method. Maintenance: one rag coat on high-wear spots as needed; once a year one coat of the tinted oil.
HVLP
- Consumption
- 60–80 g/m² per coatdealer
- Coats
- 2dealer
- Recoat
- 12 hdealer
- Why ru
- Сочетает указание дилера о способе «распыление / втирание» и правило снятия излишков через 10–15 мин со стандартной практикой работы с твёрдым воском-маслом.
Spraying is just a quick way to lay the oil down: one thin, even wet coat, then after 10–15 min work it in and wipe off the excess with a rag or pad, or you get tacky patches. Good extraction — the oil mist is flammable.
Airmix (air-assisted airless)
- Consumption
- 60–80 g/m² per coatdealer
- Why ru
- Экстраполировано с официальной страницы о методах нанесения и стандартной производственной практики нанесения масел.
Only for production runs of flat parts; still rub in and wipe off after spraying. Airless not recommended: far too much material for a thin oil coat.
Process and compatibility
- Substrate preparation
- Degrease, sand (P150–180 for OTL90; the dealer gives P100–120 for OTL90.10) and remove dust. Apply between 10 and 35 °C.dealer
- Sanding
- No between-coat sanding is specified; for repairs/refresh, scuff lightly with a pad and apply another coat.recommended
- Temperature and humidity
- 10–35 °Cdealer
- Don'ts
- Don't leave surplus oil standing for more than 10–15 min
- Don't let oily rags dry out in a pile — risk of spontaneous combustion
- Don't overcoat with 2K lacquers
- Don't pour it down the drain
Storage
- Storage temperature
- в сухом прохладном месте вдали от прямых солнечных лучейdealer
- Packaging
- 1 лdealer
Safety: Flammable — keep away from flames and sparks. Wear gloves, ventilate, avoid skin and eye contact; rinse with water if exposed. Put oily rags, clothes and sanding dust in a sealed metal can under water — they can self-ignite. Keep away from children, do not swallow, do not pour down the drain.
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- official page: properties, use, density 0.91, drying ≥12 h, solids 46 %, viscosity 16 s DIN4, appearance
- dealer OTL90: description, properties, method, 10–35 °C, P150–180, 2 coats, 12 h/24 h, 60–80 g/m², spray/rub-in, safety, storage, 1 L
- dealer OTL90.10 white: P100–120, natural stiff brush, wipe excess after 10–15 min, S60 brush cleaning, maintenance, self-ignition warning
- official application methods page (airmix air 1–2 bar etc.) used for derived spray guidance
Not covered by the sources
- No Technocolor TDS PDF found: not in local catalogs/transcripts; web search budget exhausted; lakokraska31.ru / woodonline.ru searches for OTL90 return nothing
- OTL90 not in the 2025-2026 Technocolor catalog transcripts
- Not used in any official finishing schedule (information/technology)
- Shelf life not stated
- Solids, viscosity and density for OTL90.10 (white) not published; assumed same base
- No thinner officially specified (S60 named only for brush cleaning)
- Official drying 'not less than 12 h' vs dealer 12 h between coats / 24 h full — no figures for foot traffic or full cure
- Sanding grit conflicts: P150–180 (OTL90 dealer page) vs P100–120 (OTL90.10 dealer page)
- No official spray settings — all nozzle/pressure values are derived
- Hardness, chemical resistance, lightfastness, elasticity not published
- Tinting pastes for tinting the clear oil not named
- Other colour variants beyond .10 white not found at the dealer