LBR102
LBR102 white thixotropic polyurethane primer (2K)
Two-component white thixotropic polyurethane primer with high solids (~72 %). Wets out very well, levels over grain/figure, dries fast and runs beautifully on electrostatic bell and disc installations. Its low shrink-back makes it a good base under high-gloss finishes. Sands easily by hand or machine and stays flexible.
- electrostatic priming of chairs, turned parts and beech furniture
- white primer under high-gloss pigmented finishes
- MDF, HDF, veneered panels and solid wood (resinous and non-resinous softwoods, light and dark hardwoods)
Mix calculator
Ask about LBR102
Answers are based on the LBR102 data and the products it mixes with.
Mixing matrix
- LNB77Hardener% by weight: 50 %official% by volume: 65 %official
Standard general-purpose hardener; dealer: 'can be catalysed with 50 % LNB77 for general use when electrostatic wetting is not required'.
LNB77 is the hardener for PU primers and matt lacquers, solids 25 ± 1 % (dealer). Milesi TDS: 23.4 ± 2 %.
- LNB613Hardener% by weight: 40 %official% by volume: 55 %official
LNB613 solids 26 ± 1 % (dealer). Milesi TDS: 26.1 ± 2 %.
- LNB190Hardener% by weight: 50 %datasheet% by volume: 70.7 %datasheet
When yellowing resistance matters (Milesi TDS).
Only in the US Milesi/IVM TDS; not listed by t-color.ru or the dealer — check availability. Solids 26.2 ± 2 % (TDS).
- % by weight: 10–30 %official% by volume: 15–40 %official
Normal evaporation, standard 18–22 °C conditions.
Thin to 20 ± 2 s Ford 4. LZC1051 is the official 'PU thinner'; LZC1026 speed isn't published but it is the TDS default.
- LZC1026Thinner% by weight: 20 %datasheet% by volume: 31 %datasheet
TDS recipe for all three hardeners; gives 20 ± 2 s Ford 4.
- LZC8643Thinner% by weight: 10–30 %official% by volume: 15–40 %official
Official: slow thinner for PU and acrylic materials.
- LBA22 / LBA26Additive% by weight: 0–30 %dealer
To build fuller gloss finishes and bind the product better — add clear PU primers LBA22–LBA26 up to 30 %, catalyse with LNB77.
Dealer also advises one or more intermediate coats of clear PU primer for a better gloss result.
| Role | Material | % by weight | % by volume | When |
|---|---|---|---|---|
| Hardener | LNB77 | 50 %official | 65 %official | Standard general-purpose hardener; dealer: 'can be catalysed with 50 % LNB77 for general use when electrostatic wetting is not required'.LNB77 is the hardener for PU primers and matt lacquers, solids 25 ± 1 % (dealer). Milesi TDS: 23.4 ± 2 %. |
| Hardener | LNB613 | 40 %official | 55 %official | LNB613 solids 26 ± 1 % (dealer). Milesi TDS: 26.1 ± 2 %. |
| Hardener | LNB190 | 50 %datasheet | 70.7 %datasheet | When yellowing resistance matters (Milesi TDS).Only in the US Milesi/IVM TDS; not listed by t-color.ru or the dealer — check availability. Solids 26.2 ± 2 % (TDS). |
| Thinner | LZC1026 / LZC1051 | 10–30 %official | 15–40 %official | Normal evaporation, standard 18–22 °C conditions.Thin to 20 ± 2 s Ford 4. LZC1051 is the official 'PU thinner'; LZC1026 speed isn't published but it is the TDS default. |
| Thinner | LZC1026 | 20 %datasheet | 31 %datasheet | TDS recipe for all three hardeners; gives 20 ± 2 s Ford 4. |
| Thinner | LZC8643 | 10–30 %official | 15–40 %official | Official: slow thinner for PU and acrylic materials. |
| Additive | LBA22 / LBA26 | 0–30 %dealer | — | To build fuller gloss finishes and bind the product better — add clear PU primers LBA22–LBA26 up to 30 %, catalyse with LNB77.Dealer also advises one or more intermediate coats of clear PU primer for a better gloss result. |
Percentages are per 100 parts of component A.
Characteristics
- Solids
- 72 ± 1 % (part A, by weight)dealer
- Viscosity
- 20 ± 2 sdealer
- Density
- 1.351 ± 0.030 kg/l (part A)datasheet
- Gloss
- n/a (primer)recommended
- Pot life
- 2 (LNB77 or LNB190) / 4 (LNB613) h, max, 20 °Cdatasheet
- Drying · Dust-free
- 10 mindatasheet
- Drying · Touch-dry
- 30 mindealer
- Drying · Sand or stack
- sandable after 4 h; stackable after 24 hdatasheet
- Drying · Hard dry (h)
- 12 hdatasheet
- Drying · Full cure
- 4 hdealer
- Drying · Recoat
- between primer coats ≥ 2 h, max 3 h without sanding; topcoat (overcoatability) after 20–24 hdatasheet
- Drying · Conditions
- 18–22 °C, RH 65–70 % (TDS); 20 °C (dealer)
- Lightfastness
- aromatic PU with LNB77/LNB613 — expect some yellowing on exposure; LNB190 is the non-yellowing optionrecommended
- Elasticity
- high elasticity (dealer: «обладает высокой эластичностью», but do not exceed max consumption)dealer
- Shrink resistance
- high resistance to shrink-back — suitable under gloss finishesdealer
- Thixotropy
- yesofficial
- Wetting and levelling
- excellent wetting, good levelling over grain, fast dryingofficial
Colours
- LBR102 · white
Application
Electrostatic
- Consumption
- 130–150 g/m²official
- Wet film
- 112–132 µmdatasheet
- Spray viscosity
- 20 ± 2 sdatasheet
- Equipment
- bell (cup) and disc electrostatic installations — excellent resultsofficial
- Nozzle
- 0.28–0.33 mmrecommended
- Pressure · fluid
- 50–90 barrecommended
- Pressure · air
- 1–2 barrecommended
- Voltage (kV)
- 60–80 kVrecommended
- Coats
- 1–2 coatsrecommended
HVLP
- Consumption
- 130–150 g/m²official
- Wet film
- 112–132 µmdatasheet
- Spray viscosity
- 20 ± 2 sdatasheet
- Nozzle
- 1.8–2 mmrecommended
- Pressure · air
- 2–2.5 barrecommended
- Coats
- 1–2 coatsrecommended
- Flash-off
- 10 min (dust free)datasheet
- Recoat
- ≥ 2 h between primer coats; ≤ 3 h without sanding; topcoat after 20–24 hdatasheet
- Sanding between coats
- 240–320 grit (P)recommended
If you only have a 1.5 mm tip, thin towards 30 % and lay it on thinner, in two coats.
Conventional spray
- Consumption
- 130–150 g/m²official
- Spray viscosity
- 20 ± 2 sdatasheet
- Nozzle
- 1.8–2.2 mmrecommended
- Pressure · air
- 3–4 barrecommended
Airmix (air-assisted airless)
- Consumption
- 130–150 g/m²official
- Nozzle
- 0.28–0.33 mmrecommended
- Pressure · fluid
- 50–90 barrecommended
- Pressure · air
- 1–2 barrecommended
Airless
- Consumption
- 130–150 g/m²official
- Nozzle
- 0.33–0.43 mmrecommended
- Pressure · fluid
- 120–180 barrecommended
Process and compatibility
- Substrate preparation
- Sand wood P120–P180 (beech chairs to P150), de-dust. Wood moisture 8–14 %.recommended
- Goes under
- LBA22 / LBA26
- Sanding
- Sandable after 4 h (TDS), but for best shrink resistance under gloss wait at least 24 h (dealer). Sands well by hand or machine.source
- Temperature and humidity
- apply 15–30 °C (optimum 18–22 °C), RH 65–70 % optimum, 50–70 % during drying; do not dry below 15 °C; wood moisture 8–14 %datasheet
- Don'ts
- don't exceed the 150 g/m² per-coat maximum — flexible or not (dealer)
- don't sand for gloss before 24 h — it'll shrink back (dealer)
- don't recoat primer later than 3 h without scuff-sanding (TDS)
- don't apply below 15 °C or above 30 °C (TDS)
- don't use the mix past pot life (2 h with LNB77/LNB190, 4 h with LNB613)
Storage
- Shelf life
- 18 months from productiondatasheet
- Storage temperature
- indoors 0–35 °C, ventilated, out of sunlightdatasheet
- Packaging
- 5 kg,25 kgdealer
Safety: Solvent-borne 2K PU with isocyanate hardener: spray booth with extraction only, spark-proof equipment, no smoking (TDS). Air-fed mask or A2P3 filters, nitrile gloves, goggles — follow the SDS.
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- official page: properties, methods, hardeners LNB77/LNB613 %w/%v, thinners LZC1026/1051/8643
- dealer: description, uses, solids 72±1 %, viscosity 20±2 s VZ-8, touch 30 min, full 4 h, LNB77 50/65, LBA22–26 addition note, packaging
- Milesi/IVM TDS: density, solids, Ford viscosities, 3 hardener recipes incl. LNB190, pot life, drying stages, wet film, conditions, shelf life
- LNB77 hardener dealer page
- LNB613 hardener dealer page
- LZC1051 PU thinner
- LZC8643 slow PU thinner
- application methods page (airless/airmix/electrostatic)
Not covered by the sources
- hardness, chemical resistance (not published)
- LZC1026 evaporation speed and availability on the Russian market (only on official thinner list + TDS)
- LNB190 availability in Russia (TDS only)
- LBA22/LBA26 own data (no official/dealer page found)
- catalog 2025 entry — LBR102 not found in catalog transcripts
- no Technocolor finishing schedule uses LBR102
- official/dealer volume ratio for LNB77 (65 %) differs from TDS (70.1 %) — density math favours the TDS
- dealer 'full dry 4 h' conflicts with TDS hard dry 12 h / complete 24 h
- Russian-language TDS not found; data sheet used is IVM Chemicals (Milesi USA), issue 2014-05
- Ford 8 cup (TDS) vs 'ВЗ-8' (dealer) for part A viscosity — non-standard cup designations, not cross-checkable