Skip to content
Dugan Design
← All products
+ Add to shopping list
Stains and dyesStain

CPS51-CPS62

CPS51-CPS62 — Solvent-borne pigment wiping stains (ready colours)

Solvent-borne pigment wiping stains. The official site lists them for exterior wood; the dealer describes them as furniture stains and marks CPS60-62 'for interior and exterior'. Even out colour variation, hide defects, lightfast.

  • Decks, verandas, gazebos, garden furniture, boardwalks, cladding, fences, landscape features
  • Staining furniture in any wood species

Mix calculator

g
Thinner10.0 %

When: S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.

Additive

Ratio 100 : 10.0

ComponentWeigh out
CPS51-CPS62part A455 g
S12 / S90Thinner45.5 g
Total500 g

Covers roughly 5.56 m² at 90 g/m².

Pot life of the mix: n/a (no hardener).

Ask about CPS51-CPS62

Answers are based on the CPS51-CPS62 data and the products it mixes with.

Questions and answers are stored to improve the assistant and prevent abuse; the question text is processed by Anthropic (USA). Privacy policy

Mixing matrix

  • S12 / S90Thinner
    % by weight: 0–20 %recommended

    S10 — fast, for fine-pore wood (beech, birch, maple, alder); S12 — medium, for medium-pore wood; S90 — slow, for open-grain wood (oak, ash) and big panels, gives more working time for wiping.

    Not a manufacturer recommendation — test on an offcut.

  • CPS51-CPS62Additive
    % by weight: any ratio %recommended

    For a custom shade.

Percentages are per 100 parts of component A.

Characteristics

Carrier
solvent-borneofficial
Lightfastness
good (светостойкость)dealer
Levelling
gooddealer
Pot life
n/a (no hardener)recommended

Colours

  • CPS51 · classic walnut
  • CPS52 · chestnut
  • CPS53 · American walnut
  • CPS54 · pine
  • CPS55 · cherry
  • CPS56 · mahogany
  • CPS57 · wenge
  • CPS58 · maple
  • CPS59 · teak
  • CPS60 · alder
  • CPS61 · grey oak
  • CPS62 · tobacco

Application

HVLP

Nozzle
1.2–1.4 (typ. 1.3) mmrecommended
Pressure · air
1.5–2 barrecommended
Spray viscosity
10–16 s DIN4recommended
Consumption
80–100 g/m²dealer
Flash-off
20 minrecommended
Recoat
prime/topcoat when dry (≥ 20-60 min)recommended

Stir thoroughly — the pigment settles. Keep shaking the cup while you work. One even wet coat, no puddles; lighter on end grain. To wipe: spray, give it 1-3 min, then wipe along the grain with a sponge or lint-free rag, packing pigment into the pores. CPS51-62 are sold as wiping stains; no binder is listed for them.

Cloth or pad

Wiping with a sponge or soft rag removes the excess after spraying (Technocolor's method definition). CPS51-62 are officially 'pigment-based wiping stains'.

Roller coater (UV)

Flat parts on a roller-coater line only. Dealer gives 10-20 g/m²; no official schedule covers CPS51-62.

Brush

On exterior structures (fences, decks) it can be brushed on and wiped back with a rag.

Process and compatibility

Substrate preparation
Dry wood (≤ 15 % MC outdoors), sand P120-P180, de-dust; take grey weathered wood back to fresh.recommended
Temperature and humidity
10-25 °C, RH ≤ 80 %, no direct sun or rainrecommended

Storage

Packaging
1 or 5 кг (CPS58: 1 кг only)dealer

Mixed into

CPS51-CPS62

Sources

Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).

Not covered by the sources
  • any mix ratio (thinner/binder) — none published for CPS51-62
  • drying times
  • solids, viscosity, density
  • whether CPS51-62 share chemistry with the CPS concentrates (kept as separate entry)
  • interior vs exterior: official says exterior, dealer says furniture (CPS60-62 interior+exterior)
  • recommended exterior topcoat system
  • shelf life / storage temp
  • SDS
  • official pages for CPS51-57,59-61 are empty stubs (name only)
  • no TDS PDF found