Skip to content
Dugan Design
← All products
+ Add to shopping list
UV-curePutty

VPS20019

VPS20019 white UV-cure roller filler (catalog: white UV filler-primer)

Single-component product: no mixing needed — use as supplied (see application below).

Ask about VPS20019

Answers are based on the VPS20019 data and the products it mixes with.

Questions and answers are stored to improve the assistant and prevent abuse; the question text is processed by Anthropic (USA). Privacy policy

Characteristics

Solids
100catalog
Pot life
n/a — single-component UV-cure, no hardener; stable in the machine until exposed to UVrecommended
Drying · Cure
UV lamp cure, 1 lamp rated 80–120 W (official schedules write 'Вт'; industrial medium-pressure lamps are normally rated per cm, i.e. 80–120 W/cm) at ~10 m/min for a filler coat — by analogy with the VTS20011 roller filler in official UV schedules; a white pigmented coat may need lower belt speed or a Ga-doped lamprecommended
Drying · Flash-off
none needed — 100% solids, no solvent to flashrecommended
Drying · Conditions
UV lamp cure; shop ~18–25 °Crecommended

Colours

  • white · white

Application

Roller coater (UV)

Consumption
20–25 g/m²official
Wet film
13–18 µmrecommended
Coats
1–2 roller passes, each UV-cured (gelled) before the next; build to taste, then sandrecommended
Sanding between coats
After full cure: P240–P320 before primer/topcoatrecommended

Process and compatibility

Substrate preparation
Sanded flat panel (MDF/veneer), P150–P220, dust-freerecommended
Sanding
P240–P320 after cure, before primer/enamelrecommended
Temperature and humidity
Normal shop conditions; keep material away from daylight and UVrecommended

Storage

Safety: No manufacturer data. UV materials contain acrylate monomers (skin sensitisers): nitrile gloves, goggles, avoid skin contact; shield eyes/skin from UV lamps.

Sources

Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).

Not covered by the sources
  • No dealer page (t-colormarket.ru search for VPS20019/20019 re-checked 2026-10-05: zero results — shop has no UV category; woodonline.ru, lakokraska31.ru, ndom31.ru also not listing it)
  • No TDS PDF found (web search budget exhausted in this session)
  • Viscosity, density, gloss, hardness, chemical resistance not published
  • Exact UV cure dose (mJ/cm²) / lamp type not published for this code
  • Not used in any official finishing schedule
  • Shelf life, packaging, storage temperature unknown
  • Thinner/diluent: none listed (catalog gives no thinner for VPS20019; S30 is listed only for spray UV primers)
  • Catalog description text is identical to VTS20014 ('Отличается легкостью шлифования… дверей, фасадов и т.п.' — verified identical on p.14; likely copy-paste)