APL70 R9005 M
Acrylic enamel aerosol, RAL 9005 Jet Black, 20 gloss (M)
Acrylic enamel in aerosol cans for touch-up and repair work: high hiding power, rich colour, fast drying. Ready to use, leaves no overspray halo. Comes with two actuator caps — one for halo-free blending and one for first-coat painting.
- Any wood species
- First finishing of small surfaces
- Restoring the surface after defects have been repaired
- Evening out the sheen over a repaired area
Single-component product: no mixing needed — use as supplied (see application below).
Ask about APL70 R9005 M
Answers are based on the APL70 R9005 M data and the products it mixes with.
Characteristics
- Gloss
- 20 gloss unitsdealer
- Drying · Full cure
- 3–4 hdealer
- Drying · Conditions
- 20 °C
- Ready to use
- yesdealer
- Volume
- 400 mldealer
Colours
- RAL9005 · Jet black (RAL 9005)
Application
Aerosol
- Consumption
- 80–100 g/m²dealer
- Consumption (catalogue)
- 150 g/m²catalog
- Spray distance (cm)
- 15–25 cmdealer
- Nozzle
- not applicable — use the can's own actuatorsrecommended
- Spray viscosity
- n/a (ready to use)recommended
- Sanding between coats
- normally none; if dust nibs, denib after full dry with P600–P800 or a grey Scotch-Brite and finish with a last light passrecommended
Shake the can before use. Do not spray onto cold or hot surfaces. Spray from 15–25 cm. After use, turn the can upside down and spray until clear to purge the nozzle. dealer
Process and compatibility
- Substrate preparation
- Repair area: fix the defect (wax/filler), sand flush, scuff the surrounding old finish with P320–P400 or grey Scotch-Brite, de-dust and degrease. Prime bare wood/filler first.recommended
- Don'ts
- Do not spray onto cold or hot surfaces
- Do not thin or add hardener
- Do not sand or polish the final matt coat
- Do not lay it on in one heavy coat
Storage
- Packaging
- aerosol can 400 ml + 2 actuator capssource
Sources
Value tags: “official”, “dealer”, “catalog”, “schedule” are Technocolor data; “workshop” is from our own datasheets; “recommended” is our engineering estimate (hover to see the reasoning).
- dealer product page: description, properties, use, 80–100 g/m², notes, 20 gloss, full dry 3–4 h at 20 °C, 400 ml, RAL9005
- dealer search: full APL70 code list (white UM/M/SM/G, RAL1013/1015/9001/9003/9005/9010/9016)
Not covered by the sources
- official t-color.ru page (none exists)
- TDS/SDS for APL70 (none found; web search budget exhausted)
- solids %
- viscosity (n/a for aerosol; not published)
- density
- dust-free / touch-dry / sandable times (only full dry 3–4 h published)
- shelf life
- hardness, lightfastness, chemical resistance, elasticity
- exact binder chemistry (only 'acrylic')
- consumption conflict: dealer 80–100 g/m² vs catalog 150 г/м²
- catalog transcript says 'безвоздушного' while leaflet/dealer say 'безореольного' — transcript likely misread
- APL70 G gloss conflict: leaflet/dealer 70 gloss vs catalog 2025 75 gloss (not relevant to this M code)